自動涼茬機是一種新型釀酒設備，具有速度快，功率高等特色。
Automatic stubble cooling machine is a new type of brewing equipment with fast speed and high power.
該機可使攤糧、加曲、混合等工序一次完成，并實現糧糟攤層的高度操控。
This machine can complete processes such as grain spreading, koji addition, and mixing in one go, and achieve height control of grain residue spreading layer.
運送采用雙節距不銹鋼鏈絞式板鏈，板面平整且工作平穩，采用變頻調速。
The transportation adopts a double pitch stainless steel stranded plate chain, with a flat surface and stable operation, and adopts variable frequency speed regulation.
變冷體系選用四組低噪音全不銹鋼離心風機，二組配有變頻調速。
The cooling system adopts four sets of low noise all stainless steel centrifugal fans, and two sets are equipped with variable frequency speed regulation.
全段設有一組攤平設備、三組翻糧設備、兩組曲糟混合設備和一組毛刷刷料設備。
The entire section is equipped with one set of leveling equipment, three sets of grain turning equipment, two sets of koji residue mixing equipment, and one set of brush material brushing equipment.
加曲均勻，變頻無級調速，操控加曲量。
Uniform bending, variable frequency stepless speed regulation, and control of bending amount.
設有板鏈毛刷清洗體系，箱體單側設有一排清洗活動門，做到衛生。
Equipped with a plate chain brush cleaning system, there is a row of cleaning movable doors on one side of the box, ensuring hygiene.
設備整體表面進行拉絲處理。
The overall surface of the equipment is subjected to wire drawing treatment.
全自動涼茬機與原始的打茬機相比，優勢更明顯，全自動涼茬機是在原打茬機的基礎上研制出來的，全自動涼茬機價錢，原打茬機涼茬需要40-50分鐘，經過升級后的全自動涼茬機僅需要20分鐘左右，縮短了工作時間。
Compared with the original stubble cutting machine, the fully automatic stubble cutting machine has more obvious advantages. The fully automatic stubble cutting machine is developed on the basis of the original stubble cutting machine. The price of the fully automatic stubble cutting machine is 40 to 50 minutes for the original stubble cutting machine to cool the stubble, while the upgraded fully automatic stubble cutting machine only takes about 20 minutes, shortening the working time.
原打茬機整個涼茬進程，大約需要40-50分鐘，運用全自動涼茬機，僅用20分鐘左右，涼茬機，縮短了時間，并且整機配用動力小、工作時間短、節約能源、涼茬效果更佳。原地下打茬機，在涼茬進程中，從畢子孔落入地下風道的茬子約占總量的百分之三左右，無法回收，造成了質料直接糟蹋。裝置前需要挖坑、壘墻、組織污管道等繁瑣的準備工作
The entire cooling process of the original stubble cutting machine takes about 40-50 minutes. Using a fully automatic stubble cutting machine, it only takes about 20 minutes. The cooling machine shortens the time, and the whole machine is equipped with low power, short working time, energy-saving, and better cooling effect. During the cooling process of the original underground stubble cutting machine, about 3% of the total amount of stubble fell into the underground air duct from the Bi Zi hole, which could not be recycled, resulting in direct waste of materials. Before installation, tedious preparations such as digging pits, building walls, and organizing sewage pipelines are required
The exciting content of this article is provided by the knowledge provided by the fully automatic stubble cooling machine. There are also many exciting content on this website, and you can click to enter more content: http://www.tersatig.cn We have dedicated customer service to answer your questions
自動售酒機 2024-07-25 
